T4.24S

4 inputs and 8 outputs audio processor

Fully programmable 4-input/8-output 24-bit digital audio system processor. Programming is accomplished through front panel controls and a 2X20 character display, utilizing a very intuitive and user-friendly interface. The system software can be used on a PC platform or under MIDI. Can provide signal distribution, gain control, equalization, delay and limiting. Takes up one rack space Four input interfaces - eight output interfaces The output can be assigned to any input 12, 18 and 24dB/octave slope 682ms input delay, 21ms output delay Using Linkwits-Riley, Bessel and Butterworth filters Parametric equalizer: full bandwidth, 1/64th to 4th octave range Each output is equipped with a limiter Intuitive user interface

Programming via front panel, PC or MIDI
48kHz sampling frequency
Independent input and output instructions
Balanced inputs and outputs
XLR speaker interface
Equipped with ASHLY special PROTEA control software
application:
Sound system distribution
sound processing
Sound management for multipurpose hall partitions or lobby sound projects
Speaker system processing for main sound reinforcement
Speaker distance delay and side fill control
Stage monitor adjustment and speaker protection
Performance characteristics:
Input: Fully balanced interface, 18K ohms
Maximum input level: +20dBu
Input gain range: -40dB to +12dB
Output: Fully balanced interface, 112 ohms
Maximum input level: +20dBu
Input gain range: -40dB to +12dB
Distortion: <0.01 @ 1KHz, +20dBu
Dynamic range: >110dB 20Hz - 20KHz unweighted
Output noise: <-90dBu unweighted

EQ filter
Number of segments: Input 4-segment parameters, output 3-segment parameters
Parameter range: 1/64Th octave ~ 4 octave
Range: +15/-30dB, 0.1dB increase
Frequency response: 1/24th octave
Frequency division filter
High-pass filter and low-pass filter frequency range: 19.7Hz to 21.9kHz, off
delay
Input delay: 0 - 682 ms
Output delay: 0 - 21.3 ms
Value added: 20μs
Input and output gain
Range: +12/-40dB, 0.1dB increase
Polarity: 0 or 180 degrees
Compressor/Limiter
Input range: -20dBu to +20 dBu
Compression ratio range: 1.2:1 to INF:1
Startup time range: 0.5ms to 50ms
Recovery time range: 10ms to 1s
processor
Input A/D: 24bit
Output D/A: 24bit
Sampling ratio: 48kHz
Add delay: 1.46ms
other
Power requirements: 80 - 260VAC, 30W
Packing weight: 10lbs
Dimensions: 19.0”L x 1.75”H x 6.0”D
I/O interface: XLR